Handle with pointed shoes to squeeze feet:

1. Wine dipping method

Pour the white wine (about 25 grams) into the new leather shoes, shake it a few times, and put it on for an hour, then the leather will no longer be hard and the shoes will no longer pinch your feet. If the edges of the shoes are ground, such as at the heels, you can dry the wet paper towels and soak them in white wine. Use a clip to fix the shoes on the feet, and leave them for one night. If you wear them the next day, you will not wear them .

2.Rolling method

If the edges of the new leather shoes are ground, use a wet towel to cover the area of the ground for a few minutes to make it damp and soft, and then use a cylindrical object (such as a glass bottle) to roll it several times to make the area of the ground smooth. Flat, you won't grind your feet anymore.

 3.Wedge palm method

If the condition of the new leather shoes is more serious, you can cover it with a wet towel and then use the shoe wedge to support it.

4.Hammering

If the soles of the new leather shoes are ground, you can put them on the crutches of the shoes, and use a hammer to strike them hard to flatten the feet. What to do if the heels of the new shoes are polished. If you do not have shoes, you can also use other iron.

5.Solid peptizing method

After dissolving with solid glue, drip it onto the decorative nail of that grinding foot, and it's fine. You can stick a small piece of soft cloth after the glue and before the glue is hard, as long as you are careful.

 6, newspaper wetting method

Scrap the waste newspaper into a ball, moisten it with water (slightly), take a newspaper bag, and tuck it into the shoes where your feet are rubbed. It must be tight. This method is absolutely useful.

7, blow method

For some parts of the grinding feet, such as the heels and the sides of the toes, there will be blisters: you can use a hair dryer to blow the parts of the shoes that grind the feet until the skin becomes soft, and then use a hard object to smash Smash, this method is very good, especially suitable for shoes after grinding heels.

8. Liquor law

You can use white wine to rub the feet in the shoes, soak them for about 5 to 15 minutes, wait for them to be slightly soft, then put on walking, and don't grind the feet after drying.

You can also spray alcohol on the cloth strips and wait until it gets wet, then stuff the cloth strips into the shoes, and you can wear it the next day.

9.Adhesive tape method

Use adhesive tape to stick your shoes to your feet. After a while, you won't rub your feet.

 10, stamping method

Fold the part of the grinded foot inside and recess it, just like stepping on the slipper, and then it will be much better for a few days.

11.Hammer

Cover the area where your feet are ground with a damp cloth, and then gently smash them repeatedly with a small hammer to make them soft, and then wear them without rubbing your feet.

12, anti-wear stickers

Buying a wear-resistant sticker specifically for rubbing your feet is a bit like a band-aid, but much softer.

1. Cover your feet with a wet towel for a few minutes, then cover the feet with a dry soft towel, tap with a hammer a few times, flatten the area where the feet are worn, and the leather on the shoes becomes soft. He will not grind his feet after peace.

2. Take a piece of newspaper, knead it into a ball, and dip it in water. Don't get too wet, but take the whole ball with water, and then wrap the dry newspaper with the wet newspaper, put it on the feet and squeeze the shoes. Seal it in a plastic bag and leave it overnight.

3. If the new shoes are too small to pinch your feet, you may wish to cover them with a wet towel and then use the shoe wedges to support them.

4. Before putting on the shoes, first take a piece of soap (usually a candle can also be used) and apply a thin layer on the part that comes in contact with the heel, so the heel will become smooth and no longer wear the feet.

Women's leather shoes are recommended to pay attention to:

A good pair of leather shoes, in addition to maintaining their own materials, correct wearing habits can improve the durability of leather shoes:

① Don't force yourself when encountering new shoes that are difficult to wear

② Should use shoehorn, do not step on the heel when slippers, so as not to pile up

③Leather shoes should not be damp, rain-soaked, water-brushed, exposed to the sun, and fire-baked. Wipe them with a dry cloth as soon as possible and use paper to support them. Let them dry in a ventilated and dry place.

④ Do not step on water, gravel or hard objects on the leather bottom. It is recommended to use rubber bottom to extend the life.

⑤ Regularly check the palm surface (additional layer of the heel to the ground) when wearing, and find that it is deeply worn and should be replaced in time.

⑥ Due to the perspiration of human feet, discoloration may occur in leather shoes, which is normal.

⑦Diamond and metal buckle are set by hand. Oxidation or discoloration will occur when wearing or wet places, which is normal.

⑧Shoes should not be worn for more than two days in a row to allow the leather to breathe.

Leather shoe care knowledge:

① Wipe off the dust with shoe cloth or soft fur. The gap between the heel and the shoe body can be wiped with a pointed brush, then put in the shoe support, and can be put in a newspaper instead.

② Do not use liquid shoe polish to prevent it from penetrating into the skin. When using high-quality special leather shoe cream, apply leather cream to shoes. Avoid applying shoe cream directly to the leather surface. It should be applied to shoe cloth or shoe polish first.

③ If the leather shoes get wet, you should use a dry cloth to absorb the water from the leather shoes, and then put them in a cool place to allow the leather shoes to dry naturally. Otherwise, it may burst or shrink.

④ When cleaning leather shoes, do not wash with water and contact with chemical solvents.

⑤ Take care of leather shoes (especially rainy days) before travelling.

Maintenance guide

1. Calf, fetal cow, sheep, soft sheep, soft cow series:

Wipe the upper with a soft, dry cloth. Select an appropriate amount of high-quality leather shoe care cream of the same color and evenly apply it to all parts of the shoe upper. Leave it to air dry for five minutes, and then wipe it back and forth with a soft cloth. Do not apply too much force until a natural gloss appears.

2. Patent leather series:

① Use a damp cloth to clean and dry the entire upper.

② Avoid contact with oils, acids and alkalis to prevent the skin from being contaminated or yellowing.

③Patent leather shoes should not be exposed to the sun or grilled in the sun, and should be kept away from high-temperature places, otherwise it will be prone to yellowing, cracking, and aging.

④ When stored after wearing, each shoe is covered with a shoe bag separately to prevent the color of other leathers from fading to the patent leather upper, especially the light-colored leather is more prone to contamination.

⑤ Prevent corners and utensils from scratching the shoe surface. It is normal to wear or rub or discolor or drop the film when in contact with water.

⑥ When wearing, it is normal for the patent leather to flex.

3. Charred leather series:

Wipe the upper with a soft, dry cloth. Use colorless and transparent special leather shoe care cream, wipe it back and forth with a soft cloth on the shoe surface, and a natural gloss will appear.

4. Catching cattle and sheep series:

① The characteristics of this type of leather are that it feels oily and soft, and the flaws with small spots are the style of this type of leather.

②Because there is no coating on the leather surface, please pay special attention to oil stains and dirt. Once the pollution has penetrated into the leather surface, it is difficult to remove. If it is only partially wet with water, the original appearance can be restored after air-drying.

5.Cleaning leather series

① After the surface of the rubbed leather is processed, the leather surface will naturally discolor and show a two-color effect, which is normal.

② Try not to wear it continuously for a long time, because the flexure of continuous wear is easy to deform and wrinkle, and it is easy to cause serious discoloration.

③ Keep the shoe upper clean when wearing it. If you encounter oil stains or stains, it is easy to partially discolor when washing.

④ Avoid rain and wet cloth. In case of soaking in water, you can only wipe it gently with a dry cloth, put it in a ventilated place to dry naturally, and then apply oily colorless transparent shoe polish to lightly rub the surface of the leather.

6. Waxed leather series:

The waxing skin care is best treated with white wax, but the wax should not be too much. If you don't mind, you can also use colorless shoe polish to clean it quickly and vigorously with a clean white cloth. The skin color will deepen, which is normal. Only natural gloss is required.

7. Cashmere and frosted leather series:

This kind of leather surface uses a shoe brush to remove dirt and other debris on the leather surface. When brushing, pay attention to the direction of the hair, and then use a household hair dryer to adjust to cold air to blow away dust, particles and other debris accumulated in the fluff. Try to avoid wearing such shoes on rainy days.

8. Film, mirror film series:

Clean the upper with a damp cloth. When tidying up shoes, pay attention to handle gently to prevent nails and angular objects from scratching the upper.

9. Cloth series:

Use a slightly damp cotton cloth to remove the stains and dry in a ventilated place. Cloth products need more care for cleaning and care, and should not be worn on rainy days.